Siemens HiPath 3000 Service Manual

Workpoint Clients
P31003-H3550-S403-4-7620, 02/05
10-92 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
wclient.fm
Attendant console versions
10.8 Attendant console versions
10.8.1 optiPoint Attendant
A specially equipped optiPoint 500 basic, optiPoint 500 standard, optiPoint 500 advance or op-
tiPoint 600 office can perform switching services for HiPath 3000/5000. This optiPoint Attendant
simultaneously serves as the intercept position. It is the destination for all incoming non-DID
calls and calls which the call-allocation algorithms are unable to route to users (intercept calls).
The attendant routes these calls to the correct destination.
Standard key assignment (default) for optiPoint Attendant
Additional information can be found in the operating manual optiPoint Attendant for HiPath
3000/5000 which is contained on the “Electronic Operating Instructions” CD (see Section 1.6,
“Information on the Intranet”: Electronic Documentation on Com ESY Products).
Figure 10-34 optiPoint 500 standard - Standard Key Assignment (Default) for optiPoint At-
tendant
Service Night service
Number redial Internal Phonebook
Microphone on/off Queued calls
Loudspeaker Override
Hold
External 1
External 2
Disconnect

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English