HiPath 5000 Startup and Administration
P31003-H3550-S403-4-7620, 02/05
6-12 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
start_h5.fm
HiPath 5000
6.6 HiPath 5000
6.6.1 Preparing for Installation
To ensure successful installation, you should check the points listed in the table below before
installing the HiPath 5000 software.
Table 6-5 HiPath 5000 - Preparing for Installation
Component Description
Hard disk parti-
tioning
The server PC hard disk should be divided into two NTFS partitions. The
main partition C should have a capacity of at least 4 GB and should be re-
served for the operating system and the HiPath 5000 software.
For safety reasons, partitioning with the format FAT 16/32 is not permitted.
Hardware Make sure that no unnecessary hardware is connected to the server PC;
any sound cards should be removed.
Access privileg-
es
To install HiPath 5000, you must log on to the operating system with admin-
istrator rights or, if necessary, log on as the server domain administrator.
LAN integration Check to ensure that the server PC has been correctly integrated in the cus-
tomer LAN (see Section 6.6.2).
Miscellaneous All applications running in the background must be closed prior to software
installation.
To Next Page
Loading...
Need help?
General