wclient.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
10-57
Workpoint Clients
IP Telephony (Voice over IP)
10.6.1.3 Connection and Startup
The optiPoint 410/420 Administrator Manual contains information on how to connect and start
up optiPoint 410 and optiPoint 420 telephones.
Use HiPath 3000 Manager E to configure an optiPoint IP telephone for HiPath 3000/5000.
The optiPoint IP telephone software can be upgraded using:
● the Deployment Tool.
Refer to the Deployment Tool Administrator Guide for IP Telephones for information on the
tool.
● WBM access to the respective optiPoint IP telephone.
The optiPoint 410/420 Administrator Manual contains information on this procedure.
Download
The manuals and tools referred to in this document are available for download at http://www.si-
emens.com/hipath (–> Downloads).
To Next Page
Loading...
Need help?
General