To Next Page

To Previous Page

wclient.fm

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

10-63

Workpoint Clients

IP Telephony (Voice over IP)

10.6.1.4.3 Possible Configurations for the Add-On Devices

The following table shows the possible configurations for add-on devices on telephones from

the optiPoint 410 and optiPoint 420 families (not optiPoint 410 entry, optiPoint 410 economy,

optiPoint 420 economy and optiPoint 420 economy plus).

10.6.1.5 Use of optiPoint 500 Adapters

The following optiPoint 500 adapters are available for use on telephones from the optiPoint 410

and optiPoint 420 families (not optiPoint 410 entry, optiPoint 410 economy optiPoint 420 econ-

omy and optiPoint 420 economy plus):

● optiPoint Acoustic Adapter

Note: Floating contacts are not supported when using the adapter on optiPoint 410 and op-

tiPoint 420.

● optiPoint Recorder Adapter

Table 10-6 Add-On Device Configuration at an optiPoint 410 and optiPoint 420 Telephone

optiPoint 410 telephone

optiPoint 420 telephone

1st add-on device 2nd add-on device

optiPoint 410 standard

optiPoint 410 advance

optiPoint 420 standard

optiPoint 420 advance

optiPoint key module –

optiPoint key module optiPoint key module

optiPoint key module optiPoint BLF

optiPoint 410 display module –

optiPoint 410 display module optiPoint key module

optiPoint 410 display module optiPoint BLF

optiPoint 410 display module optiPoint SLK module

optiPoint BLF –

optiPoint BLF optiPoint BLF

1 Configuration with two optiPoint BLFs only with HiPath 3800, HiPath 3750, and HiPath 3700

optiPoint SLK module –

optiPoint SLK module optiPoint SLK module

Siemens HiPath 3000 Service Manual

Other manuals for Siemens HiPath 3000