Workpoint Clients
P31003-H3550-S403-4-7620, 02/05
10-62 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
wclient.fm
IP Telephony (Voice over IP)
Connection
The optiPoint 410 display module must always be installed as the first add-on device, in other
words, connected directly to the telephone.
The connection to the telephone is made over an interface cable with the following connectors:
input MW6, output MW8. The power supply is ensured via the connected telephone.
To Next Page
Loading...
