Siemens HiPath 3000 - Connecting Workpoint Clients; Making Trunk Connections

inst_h3.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
4-161
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
The special REAL board is mounted on the metal back panel (basic cabinet only) and connect-
ed to the backplane with a ribbon cable.
4.3.7 Connecting Workpoint Clients
For information, see Chapter 10.
4.3.8 Making trunk connections
Refer to the following board descriptions for information:
● STMD8 (S
0
trunk connection)
● TMS2 (Not for U.S.) (S
2M
trunk connection)
● TMAMF (for selected countries only)
● TML8W (Not for U.S.) (MSI)
● TIEL
● TMDID8 (for U.S. only)
● TMGL8 (for U.S. only)
● TMST1 (for U.S. only)