Siemens HiPath 3000 Service Manual

HiPath 5000 Startup and Administration
P31003-H3550-S403-4-7620, 02/05
6-16 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
start_h5.fm
HiPath 5000
6.6.3.3 Starting the Installation
A TAPI service provider must be installed on the relevant PC to enable the default setup to be
performed. Installation information can be found in Section 6.6.6.
Procedure
1. Insert the installation CD.
The installation program is started via the autorun function. Alternatively you can initiate
Setup via Windows Explorer under <CD-ROM drive letter>:\setup.exe.
2. Select the language you require for the Setup browser. German (Germany) and English
(USA) versions are currently available.
The system is prepared for installation.
3. Click Next to start the installation routine.
Important installation information is displayed.
This includes the latest information on installation. Please read this information carefully.
4. Click Next to proceed with the installation routine.
5. Select destination path.
Select the folder where you want to install the program.
Confirm the default folder c:\program files\siemens\hipath\ with Next or click
Browse and select a different folder.
6. Select program folder.
Select the location where the setup should create the new shortcuts.
Confirm the default folder HiPath with Next or select a different folder.

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English