Workpoint Clients
P31003-H3550-S403-4-7620, 02/05
10-104 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
wclient.fm
Mobile Telephones for HiPath Cordless Office
10.9.6 Logging Mobile Telephones On To the System
Introduction
Sixteen mobile telephones are released for use by entering the HiPath cordless system number
(DECT identification, 8 hexadecimal places) and inserting the SLC16 or SLC16N in HiPath
3750, HiPath 3700, or HiPath 3550, after which they can be logged on (mobile telephone
codes, or PINs, are assigned). Other mobile telephones must be released before they can be
used.
Before logging on a mobile phone, you must open the login window from a system telephone
(Assistant T) by entering the code and password. A maximum of 10 login windows can be open
at a time.
Then type the station numbers of the mobile telephones you want to log on.
10.9.6.1 Opening the HiPath 3000 Login Window
The login window remains open for ten minutes per station. The handset must log on during
this period (refer to Page 10-105).
>
For initial installation of the HiPath Cordless Office, the HiPath cordless system num-
ber must be ordered together with the SLC16/SLC16N board. Replacement boards
are always delivered without a HiPath cordless system number.
Entry Activity Display
*94 2 19970707 Open the login window Station no.:
124 Type the station number of the handset you
want to log on (such as 124)
Station no.:
125 Type the station number of the second handset
you want to log on (such as 125)
Station no.:
:
:
:
:
:
:
To Next Page
Loading...
Need help?
General