Installing HiPath 3000
P31003-H3550-S403-4-7620, 02/05
4-4 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
inst_h3.fm
Installing HiPath 3800
4.2.2 Installation Procedure
Table 4-1 HiPath 3800 - Installation Procedure
Step Installation Activity
Installing HiPath 3800 (Standalone) Installing HiPath 3800 (19-Inch Cabi-
net)
1. Selecting the Installation Site, page 4-5
(usually predetermined)
Selecting the Installation Site, page 4-21
(generally determined by the existing 19-
inch cabinet)
2. Unpacking the Components, page 4-7 Unpacking the Components, page 4-24
3. Setting up the System Cabinets (from
Page 4-8):
Single Cabinet
Two cabinets (stacked)
Two cabinets (side by side)
Mounting System Cabinets in the 19-Inch
Cabinet, page 4-25
4. Grounding the System, page 4-15
Checking the Grounding, page 4-20
Grounding the System, page 4-28
Checking the Grounding, page 4-30
5. Installing Boards (Configuration Notes), page 4-31
6. Connecting the Cable to the Backplane, page 4-49
7. If required: use an external main distribution frame or external patch panel,
from Page 4-64:
● Main Distribution Frame MDFU-E
● Patch Panel S30807-K6143-X
● S
0
Patch Panel C39104-Z7001-B3
8. Loading the System Software and Installing Subboards on the CBSAP, page 4-79
9. Connecting Workpoint Clients, page 4-80
10. Making Trunk and Networking Connections, page 4-80
11. Performing a Visual Inspection, page 4-81
To Next Page
Loading...
Need help?
General