inst_h3.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
4-1
Installing HiPath 3000
Overview
4 Installing HiPath 3000
4.1 Overview
Chapter contents
This chapter discusses the topics listed in the following table.
Topic
Installing HiPath 3800, page 4-3
● Installation Prerequisites, page 4-3
● Installation Procedure, page 4-4
● Installing HiPath 3800 (Standalone), page 4-5
● Installing HiPath 3800 (19-Inch Cabinet), page 4-21
● Installing Boards (Configuration Notes), page 4-31
● Connecting the Cable to the Backplane, page 4-49
● Using an External Main Distribution Frame or External Patch Panel, page 4-64
● Loading the System Software and Installing Subboards on the CBSAP, page 4-79
● Connecting Workpoint Clients, page 4-80
● Making Trunk and Networking Connections, page 4-80
● Performing a Visual Inspection, page 4-81
Installing HiPath 3750, HiPath 3700, page 4-83
● Installation Prerequisites, page 4-83
● Installation Procedure, page 4-84
● Installing HiPath 3750, page 4-86
● Installing HiPath 3700 (19-Inch Cabinet), page 4-127
● Loading the System Software and Installing Subboards on the CBCPR, page 4-151
● Configuration notes, page 4-152
● Connecting Workpoint Clients, page 4-161
● Making trunk connections, page 4-161
● Performing a Visual Inspection, page 4-162
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300, page 4-163
● Installation Prerequisites, page 4-163
● Installation Procedure, page 4-164
To Next Page
Loading...
