Service
P31003-H3550-S403-4-7620, 02/05
12-86 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
service.fm
Security Features
12.6.2 Automatic Logging of Administration Procedures
Definition
All accesses to customer-related data in the HiPath 3000 are automatically logged in an area
of the MMC (LOG area) reserved for this purpose. The information recorded includes who the
user is, the data manipulated by the user, and the time. An authorized user (member of the “Re-
vision” user group) can transfer the system data to a PC and assess it.
12.6.2.1 Logging
A log entry contains the following information:
● Date and time
● User name and user group
● Type of activity (format identification) and activity (command entry)
12.6.2.1.1 Format Identification and Command Entry
The following format information is logged:
● Assistant T (1)
All activities are logged, regardless of system access. The respective code with the most
important parameters is recorded as the command entry (station/number, for example).
● Assistant TC (2)
Same as Assistant T (1)
● Session Information (3)
The system access is logged, regardless of whether it is logged using Assistant T, HiPath
3000 Manager E, or other systems. Possible command entries are:
A0-1 = Login procedure
A0-2 = Logout procedure
A0-3 = Unauthorized login attempt
● HiPath 3000 Manager E Database (4)
Access to the database is logged using HiPath 3000 Manager E. Possible command en-
tries are:
A1-1 = Database read
A1-2 = Regeneration of CDB (Load CDB into the system)
A1-3 = Write database
● Program Systems (5)
APS transfers and system boots (first bootup, for example) are recorded. Possible com-
mand entries are:
To Next Page
Loading...
Need help?
General