Siemens HiPath 3000 Service Manual

service.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
12-87
Service
Security Features
– A2-1 = APSXF started
– A2-2 = APSXF ended
– A2-3 = APS boot (APS stamp also included)
● HiPath 3000 Manager E Maintenance (6)
Maintenance activities which can be assigned with the following command entries are
logged:
– B1-1 = Read error memory
– B1-2 = Delete error memory
– B2-1 = Out of service
– B3-1 = Read Direct Memory Access
– B3-2 = Write Direct Memory Access
– B4-1 = Delete base station status overload
– B4-2 = Delete base station restart
– B5-1 = Digital loopback change
– B6-1 = Trunk rolling change
– B7-1 = Read trunk status
– B8-1 = Delete trunk error counter
● Simulated or pseudo Assistant T format (7)
The HiPath 3000 Manager E records the offline changes of a CDB as a “simulated” Assis-
tant T command. For data areas subject to change by HiPath 3000 Manager E, pseudo
areas are generated. When loading an offline CDB into the system, the following simulated
commands are logged as command entries:
C1 = Pseudo area “System parameter”
– C1-1 System fags/CMI
– C1-2 System intercept/AC
– C1-3 Tones and calls
– C1-4 Direction flag special (Variable direction#)
– C1-5 System settings
– C1-6 Host Link Interface
– C1-7 Relocate activation
C2 = Pseudo area “System timer”
– C2-1 System timer
C3 = Pseudo area “S
0
configuration”
– C3-1 Station bus
– C3-2 Line supervision
– C3-3 Mode
C4 = Pseudo area “Lines”
– C4-1 Loop start parameter (Variable Slot/Line#)
C5 = Pseudo area “Digit analysis”
– C5-1 Internal number (Variable Stn#, Grp#)
– C5-2 Service codes
C6 = Pseudo area “Daylight saving time”
– C6-1 Daylight saving time

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English