pcodes.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
A-3
System Programming Codes (Expert Mode Codes)
Table A-3 Expert Mode Codes
Code Function
11 Call detail recording
11 1 CDR/station (call detail recording at station)
11 1 1 View CDR/station; enter station number
11 1 2 Print CDRS
11 2 CDR per trunk (call detail recording per trunk)
11 2 1 View CDR per trunk; select slot/trunk
11 2 2 Print CDRT
11 3 CDR central (call detail recording central)
11 3 1 Output format: 0 = compressed, 1 = long
11 3 2 Station number format, suppress digits: 0 = no, 1 = yes
11 3 3 Incoming calls: 0 = no, 1 = yes
11 3 4 Call duration 0 = no, 1 = yes
11 3 5 Output MSN: 0 = no, 1 = yes
11 3 6 Call charge display: 1 = Amount, 2 = Pulses
11 3 7 Outgoing without connection: 0 = no, 1 = yes
11 4 Call charge factor
Enter 0 % to 10000 %
11 5 ISDN factor
Enter 0 % to 10000 %
11 6 Currency, alphanumeric entry of max. 3 characters (not for U.S.)
11 7 Call log: 0 = no, 1 = yes
11 8 CDRA (call detail recording, attendant), pay phone, station.
11 9 Computing accuracy, decimal digits (0 to 3)
12 Speed dialing system
12 1 Speed dial numbers, external station numbers
000 to 999 (HiPath 3750, HiPath 3550, HiPath 3700, HiPath 3500);
000 to 299 (HiPath 3350, HiPath 3300)
12 2 Speed dial names, alphanumeric entries of up to 16 characters (optiset
E memory and optiPoint 600 office only), only if speed-dialing numbers
have been entered.
To Next Page
Loading...
Need help?
General