Codes for Activating/Deactivating Features
P31003-H3550-S403-4-7620, 02/05
B-12 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
fcodes.fm
Trunk queuing,
automatic
– – – – V – – – E, N, C X RH,
BR,
RG,
RK,
GS
Automatically af-
ter timeout if en-
abled in the CDR
Trunk queuing,
manual
– – – – V BS – – – D X RH,
BR,
RG,
RK,
GS
Activation by
pressing a key if
enabled in the
CDR
Toggle *2 – *2 – V GS U1 Mouse
click,
Key
Local
active
menu
D, E, N,
C
– – Also available us-
ing the DSS,
GESP, LTG and
MUSAP key.
DTMF trans-
mission
*53 – *53 – U – H Menu,
key
Local
feature
D, E, N,
C
– RH,
BR,
WA,
RG,
RK,
BS
DTMF trans-
mission prior
to connect
– – – – – – – – – D, E, N,
S
– RK,
BS
Only permitted in
ISD/SSD mode
and from the ENB.
Switchover per-
formed using #key
Microphone off
(mute on)
*52
(if microphone
available)
– *52 X,
T
V, T GS U1 Local
active
menu
Local
active
menu
D, E (if
micro-
phone
is avail-
able)
– – Unavailable for
workpoint clients
without a speaker-
phone if handset is
on-hook
Table B-1 Codes for Activating/Deactivating Features
Feature
Operating procedure for
Sup-
ported
work-
point
clients
(see
abbre-
via-
tions
in
Table
B-2)
Locking of
feature
Note
TDM workpoint
clients without
display,
CMI mobile
phones,
analog work-
point clients
1
S
0
work-
point cli-
ents
TDM workpoint clients with
display,
CMI feature mobile phones,
IP workpoint clients,
optiClient 130 V5.0 phone
optiCli-
ent 130
V5.0
easy-
Com
optiCli-
ent 130
V5.0
office
Code +
procedure
Code
Code
Key Menu
Code
Code
via
lock code
Status
locking on
Fixed
Programmable
bar
Dialog
Service
Abbreviations:
● Call states: RH = idle, BR = ready, WA = digit input, BS = busy, RK = incoming call, RG = outgoing call, GS = call
● Key programming: V = key can be programmed with complete feature, U = key can be programmed to start procedure, T = key with
toggle functionality
● Menu level: H = Main menu, U1 = 1st submenu, U2 = 2nd submenu