hp3hp5shTOC.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0
, Service Manual 0-5
Contents
4.2.6 Connecting the Cable to the Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-49
4.2.6.1 Backplane of the Basic Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50
4.2.6.2 Expansion Cabinet Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-53
4.2.6.3 Connecting Cables Between the Basic and Expansion Cabinet . . . . . . . . . 4-55
4.2.6.4 Connecting Peripherals to the SIVAPAC Connector on the Backplane . . . 4-56
4.2.6.5 Connecting Peripherals to the Connector Panels with RJ45 Jacks . . . . . . . 4-59
4.2.6.6 For U.S. only: Connecting Peripherals to the Connector Panels with
CHAMP Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61
4.2.6.7 Connecting Peripherals to the Connector Panels with
SIPAC 1 SU Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62
4.2.7 Using an External Main Distribution Frame or External Patch Panel . . . . . . . . . 4-64
4.2.7.1 Using an External Main Distribution Frame MDFU-E S30805-U5283-X . . . 4-65
4.2.7.1.1 Mounting the Main Distribution Frame (MDFU-E) . . . . . . . . . . . . . . . . . 4-66
4.2.7.1.2 Laying the Line Network and Jumpers on the MDFU-E. . . . . . . . . . . . . 4-66
4.2.7.2 Inserting the External Patch Panel S30807K6143-X . . . . . . . . . . . . . . . . . . 4-70
4.2.7.2.1 Installing the Patch Panel in a 19-Inch Cabinet . . . . . . . . . . . . . . . . . . . 4-71
4.2.7.2.2 Connecting the Line Network to the External Patch Panel . . . . . . . . . . 4-72
4.2.7.3 Inserting External S
0
Patch Panel C39104-Z7001-B3 . . . . . . . . . . . . . . . . . 4-74
4.2.7.3.1 Installing the S
0
Patch Panel in the 19-Inch Cabinet . . . . . . . . . . . . . . . 4-75
4.2.7.3.2 Connecting Lines to the External S
0
Patch Panel . . . . . . . . . . . . . . . . . 4-76
4.2.7.4 For U.S. only: Connecting Network Facilities . . . . . . . . . . . . . . . . . . . . . . . . 4-78
4.2.8 Loading the System Software and Installing Subboards on the CBSAP . . . . . . 4-79
4.2.9 Connecting Workpoint Clients. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-80
4.2.10 Making Trunk and Networking Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-80
4.2.11 Performing a Visual Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-81
4.3 Installing HiPath 3750, HiPath 3700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-83
4.3.1 Installation Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-83
4.3.2 Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-84
4.3.3 Installing HiPath 3750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-86
4.3.3.1 Selecting the Installation Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
4.3.3.1.1 For U.S. only: AC outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-88
4.3.3.2 Unpacking the Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-89
4.3.3.3 Install MDFU or MDFU-E (not for USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-90
4.3.3.4 Setting up the System Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-91
4.3.3.4.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-91
4.3.3.4.2 Removing the Cabinet Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-92
4.3.3.4.3 Setting Up a Single Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93
4.3.3.4.4 Mounting a One-Cabinet System on the Wall (for U.S. only) . . . . . . . . 4-93
4.3.3.4.5 Stacking Two Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-95
4.3.3.4.6 For U.S. only: Mounting Two Cabinets Stacked on the Wall . . . . . . . . 4-98
4.3.3.4.7 Setting Up a Two-Cabinet System Side by Side . . . . . . . . . . . . . . . . . 4-101
4.3.3.4.8 Setting Up a Stacked Three-Cabinet System . . . . . . . . . . . . . . . . . . . 4-102
4.3.3.4.9 For U.S. only: Installing the Seismic Anchors . . . . . . . . . . . . . . . . . . . 4-104
4.3.3.5 Grounding the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-106