Siemens HiPath 3000 Service Manual

licensing.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
8-25
Licensing
Licensing Scenarios
>
Note on Replacing the HiPath 3000 Control Board:
When the control board has been successfully replaced, the CDB must be trans-
ferred to HiPath 3000. A warning will appear that the MAC address is invalid. All li-
censes become invalid if the CDB is installed. The system goes into default and fea-
tures that are subject to mandatory licensing will suffer from reduced functionality.
The new license key (see step 12) must be used to achieve valid licensing.
Section 8.3.4 describes the procedure for distributing licenses with HiPath 3000
Manager E.

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English