licensing.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
8-27
Licensing
Licensing optiClient Attendant
3. Enter the LAC and MAC address at the CLS in order to generate the license key either
● a) via CLM/CLS communication,
or
● b) via direct communication with the CLS via a web browser.
4. Transfer the license key from the CLS via the CLM to the CLA (CLC - HiPath 3000
Manager E).
● a) via CLM/CLS communication,
or
● b) manually on the CLM (license key is already available, offline activation).
5. Write the CDR to HiPath 3000 V5.0. (Once the license data has been transferred to
HiPath 3000, the CLA is no longer required.).
6. Install optiClient Attendant(s).
“Any” number of optiClient Attendants can be installed. However, HiPath 3000 moni-
tors the number of licensedoptiClient Attendants as part of the logon procedure.
Depending on the model, up to six optiClient Attendants can be started per system.
When the HiPath 3000 is started for the first time, a 30-day grace period begins. Dur-
ing this time, all HiPath 3000 features that require licensing (including optiClient At-
tendant) can be operated without a license. All features that require a license (includ-
ing optiClient Attendants that have been subsequently installed) must be licensed
before the grace period of the HiPath 3000 expires. The 30-day limit cannot be ex-
tended and a second grace period will not be granted.
In this case, the CLS generates a license key for HiPath 3000 V5.0.
Note: For CLS, an optiClient Attendant V7.0 is generally specified as a “HiPath 3000/
5000 V5.0 product” and “HiPath 3000 optiClient Attendant V7.0 feature”.
Step Activity (Remarks)
To Next Page
Loading...
Need help?
General