licensing.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
8-31
Licensing
Licensing optiClient Attendant
3. Enter the LAC and MAC address and the CD key of the optiClient Attendant V6.0 at
the CLS in order to generate the license key.
Input is only possible directly via the CLS (direct communication with the CLS via web
browser).
4. Transfer the license key or save it to the buffer memory.
This is completed by manually entering the license to the CLA (performed on the
CLM, offline activation).
5. Write the customer data record to HiPath 3000 V5.0.
6. optiClient AttendantInstall (s).
“Any” number of optiClient Attendants can be installed. However, HiPath 3000 moni-
tors the number of licensedoptiClient Attendants as part of the logon procedure.
Depending on the model, up to six optiClient Attendants can be started per system.
When the HiPath 3000 is started for the first time, a 30-day grace period begins. Dur-
ing this time, all HiPath 3000 features that require licensing (including optiClient At-
tendant) can be operated without a license. All features that require a license (includ-
ing HiPath 3000s that have been subsequently installed) must be licensed before the
grace period of the optiClient Attendant expires. The 30-day limit cannot be extended
and a second grace period will not be granted.
In this case, the CLS generates a license key for HiPath 3000 V5.0.
Note: For CLS, an optiClient Attendant V7.0 is generally specified as a “HiPath 3000/
5000 V5.0 product” and “HiPath 3000 optiClient Attendant V7.0 feature”.
Step Activity (Remarks)
To Next Page
Loading...
Need help?
General