Siemens SINAMICS G120X - Tools; Preventing Misuse of the Operator Panel; Compliance with the General Data Protection Regulation

5.2 Tools
Operator panel
An operator panel is used to commission, troubleshoot and control the converter, as well as to
back up and transfer the converter settings.
The Intelligent Operator Panel (IOP‑2) can either be snapped onto a converter, or is available
as handheld device with a connecting cable to the converter. The graphics-capable plain text
display of the IOP‑2 enables intuitive converter operation.
Additional information on the IOP‑2 is available in the Internet:
SINAMICS IOP-2 release for sale (https://support.industry.siemens.com/cs/ww/en/view/
109747625)
The Operator Panel BOP‑2 for snapping onto the converter has a two-line display for
diagnostics and operating the converter.
Operating Instructions of the BOP-2 and IOP-2 operator panels:
Manuals and technical support (Page 1109)
SINAMICS G120 Smart Access
The SINAMICS G120 Smart Access is a Web server module and an engineering tool that
provides wireless connection to a PC, a tablet, or a smartphone. It is designed for quick
commissioning, parameterization, and maintenance of the converters. SINAMICS G120 Smart
Access are only for commissioning and thus cannot be used with the converter permanently.
Operating instructions of the SINAMICS G120 Smart Access:
Overview of the manuals (Page 1109)
Preventing misuse of the operator panel
The operator panel does not provide protection against unauthorized access. To protect the
converter against unauthorized operation or changes to the settings, you need to prevent
access to the operator panel:
● Remove the operator panel after commissioning
● Install the converter in a control cabinet that can be locked and lock the control cabinet after
commissioning.
Compliance with the General Data Protection Regulation
Siemens respects the principles of data protection, in particular the data minimization rules
(privacy by design).
For this product, this means:
The product does not process neither store any person-related data, only technical function
data (e.g. time stamps). If the user links these data with other data (e.g. shift plans) or if he
stores person-related data on the same data medium (e.g. hard disk), thus personalizing these
data, he has to ensure compliance with the applicable data protection stipulations.
Commissioning
5.2 Tools
SINAMICS G120X converter
152 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC