Siemens SINAMICS G120X - Assigning the Modbus Register to the Parameters - Process Data

Table 6-42 Assigning the Modbus register to the parameters - process data
Regis‐
ter
Description Access Scaling Data / parameter
40100 Control word R/W 1 Process data 1
40101 Main setpoint R/W 1 Process data 2
40110 Status word R 1 Process data 1
40111 Main actual value R 1 Process data 2
Advanced commissioning
6.3 Drive control
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 249