Siemens SINAMICS G120X - CO: Technology Controller Fixed Value 3; Tec_Ctr Fix Val 3; CO: Technology Controller Fixed Value 4; Tec_Ctr Fix Val 4; CO: Technology Controller Fixed Value 5; Tec_Ctr Fix Val 5; CO: Technology Controller Fixed Value 6; Tec_Ctr Fix Val 6

p2203[0...n] CO: Technology controller fixed value 3 / Tec_ctr fix val 3
Access level: 2 Calculated: - Data type: FloatingPoint32
Can be changed: T, U Scaling: PERCENT Dynamic index: DDS, p0180
Unit group: 9_1 Unit selection: p0595 Function diagram: 7950, 7951
Min:
-200.00 [%]
Max:
200.00 [%]
Factory setting:
30.00 [%]
Description: Sets the value for fixed value 3 of the technology controller.
Dependency: See also: p2220, p2221, p2222, p2223, r2224, r2229
NOTICE
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
p2204[0...n] CO: Technology controller fixed value 4 / Tec_ctr fix val 4
Access level: 2 Calculated: - Data type: FloatingPoint32
Can be changed: T, U Scaling: PERCENT Dynamic index: DDS, p0180
Unit group: 9_1 Unit selection: p0595 Function diagram: 7950, 7951
Min:
-200.00 [%]
Max:
200.00 [%]
Factory setting:
40.00 [%]
Description: Sets the value for fixed value 4 of the technology controller.
Dependency: See also: p2220, p2221, p2222, p2223, r2224, r2229
NOTICE
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
p2205[0...n] CO: Technology controller fixed value 5 / Tec_ctr fix val 5
Access level: 2 Calculated: - Data type: FloatingPoint32
Can be changed: T, U Scaling: PERCENT Dynamic index: DDS, p0180
Unit group: 9_1 Unit selection: p0595 Function diagram: 7950
Min:
-200.00 [%]
Max:
200.00 [%]
Factory setting:
50.00 [%]
Description: Sets the value for fixed value 5 of the technology controller.
Dependency: See also: p2220, p2221, p2222, p2223, r2224, r2229
NOTICE
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
p2206[0...n] CO: Technology controller fixed value 6 / Tec_ctr fix val 6
Access level: 2 Calculated: - Data type: FloatingPoint32
Can be changed: T, U Scaling: PERCENT Dynamic index: DDS, p0180
Unit group: 9_1 Unit selection: p0595 Function diagram: 7950
Min:
-200.00 [%]
Max:
200.00 [%]
Factory setting:
60.00 [%]
Description: Sets the value for fixed value 6 of the technology controller.
Dependency: See also: p2220, p2221, p2222, p2223, r2224, r2229
NOTICE
A BICO interconnection to a parameter that belongs to a drive data set always acts on the effective data set.
Parameters
7.2 Parameter list
SINAMICS G120X converter
792 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC