04 Wobble U_generation to determine dynamic leakage
inductance
Yes No -
05 Wobble U_generation to determine magnetizing inductance Yes No -
08 Alternating U_generate to determine dead-time correction Yes No -
09 Alternating U_generate to determine stator resistance Yes No -
10 Alternating U_generate to determine rotor time constant Yes No -
11 Alternating U_generate to determine leakage inductance Yes No -
12 Alternating U_generate to determine dyn. leakage
inductance
Yes No -
13 Alternating U_generate to determine magnetizing inductance Yes No -
r3930[0...4] Power unit EEPROM characteristics / PU characteristics
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
-
Max:
-
Factory setting:
-
Description: Displays the characteristics (A5E number and versions) of the power unit.
[0]: A5E number xxxx (A5Exxxxyyyy)
[1]: A5E number yyyy (A5Exxxxyyyy)
[2]: File version (logistic)
[3]: File version (fixed data)
[4]: File version (calib data)
p3931 Options for electrical cabinets / Opt elec cabinet
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: T, U Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
-
Max:
-
Factory setting:
0000 0000 0000 0000 bin
Description: Sets the options for the Power Module 330 (PM330).
Bit field: Bit Signal name 1 signal 0 signal FP
00 Line filter Yes No -
01 Line Harmonics Filter Yes No -
02 du/dt filter compact Voltage Peak Limiter Yes No -
03 Motor reactor Yes No -
04 du/dt filter plus Voltage Peak Limiter Yes No -
05 w/o line reactor Yes No -
07 EmergOff button Yes No -
08 Emergency Stop category 0 Yes No -
09 Emergency Stop category 1 Yes No -
10 Emergency Stop category 1 24 V Yes No -
11 Braking Module (25 kW) Yes No -
12 Braking Module (50 kW) Yes No -
Parameters
7.2 Parameter list
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 849
To Next Page
Loading...
