Siemens SINAMICS G120X - Series Commissioning

8.4 Series commissioning
Overview
Series commissioning is the commissioning of several identical drives.
Precondition
The converter to which the settings are transferred has the same article number and the same
or a higher firmware version as the source converter.
Function description
Procedure
1. Commission the first converter.
2. Back up the settings of the first converter to an external storage medium.
3. Transfer the settings from the first converter to another converter via the data storage
medium.
Saving the settings and series commissioning
8.4 Series commissioning
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 949