Siemens SINAMICS G120X - CO: Active Power Actual Value; P_Act; CO: Flux Actual Value; Actual Flux; CO: Flux Setpoint; Flex Setp; CO: Torque Actual Value; Actual Torque

r0080[0...1] CO: Torque actual value / Actual torque
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2003 Dynamic index: -
Unit group: 7_1 Unit selection: p0505 Function diagram: 6714, 6799
Min:
- [Nm]
Max:
- [Nm]
Factory setting:
- [Nm]
Description: Display and connector output for actual torque value.
Index: [0] = Unsmoothed
[1] = Smoothed with p0045
Dependency: See also: r0031, p0045
Note
The value is available smoothed (r0031 with 100 ms, r0080[1] with p0045) and unsmoothed (r0080[0]).
r0082[0...2] CO: Active power actual value / P_act
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: r2004 Dynamic index: -
Unit group: 14_5 Unit selection: p0505 Function diagram: 6714, 6799
Min:
- [kW]
Max:
- [kW]
Factory setting:
- [kW]
Description: Displays the instantaneous active power.
Index: [0] = Unsmoothed
[1] = Smoothed with p0045
[2] = Electric power
Dependency: See also: r0032
Note
The mechanical active power is available smoothed (r0032 with 100 ms, r0082[1] with p0045) and unsmoothed
(r0082[0]).
r0083 CO: Flux setpoint / Flex setp
Access level: 4 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: PERCENT Dynamic index: -
Unit group: - Unit selection: - Function diagram: 5722
Min:
- [%]
Max:
- [%]
Factory setting:
- [%]
Description: Displays the flux setpoint.
r0084[0...1] CO: Flux actual value / Actual flux
Access level: 4 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: PERCENT Dynamic index: -
Unit group: - Unit selection: - Function diagram: 6730, 6731
Min:
- [%]
Max:
- [%]
Factory setting:
- [%]
Description: Displays the flux actual value.
Index: [0] = Unsmoothed
[1] = Smoothed
Parameters
7.2 Parameter list
SINAMICS G120X converter
496 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC