Siemens SINAMICS G120X - Ethernet;Ip ODVA Speed Scaling; Eth;Ip ODVA N Scal; Ethernet;Ip ODVA Torque Scaling; Eth;Ip ODVA M Scal

Value: 0: OFF1
1: OFF2
Dependency: See also: p8980
Note
Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
p8982 Ethernet/IP ODVA speed scaling / Eth/IP ODVA n scal
G120X_PN Access level: 3 Calculated: - Data type: Integer16
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
123
Max:
133
Factory setting:
128
Description: Sets the scaling for the speed for Ethernet/IP ODVA profile (p8980 = 1).
Value: 123: 32
124: 16
125: 8
126: 4
127: 2
128: 1
129: 0.5
130: 0.25
131: 0.125
132: 0.0625
133: 0.03125
Dependency: See also: p8980
Note
Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
p8983 Ethernet/IP ODVA torque scaling / Eth/IP ODVA M scal
G120X_PN Access level: 3 Calculated: - Data type: Integer16
Can be changed: T Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
123
Max:
133
Factory setting:
128
Description: Sets the scaling for the torque for Ethernet/IP ODVA profile (p8980 = 1).
Value: 123: 32
124: 16
125: 8
126: 4
127: 2
128: 1
129: 0.5
130: 0.25
131: 0.125
132: 0.0625
133: 0.03125
Dependency: See also: p8980
Parameters
7.2 Parameter list
SINAMICS G120X converter
886 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC