Siemens SINAMICS G120X - BIOS;EEPROM Data Version; BIOS;EEPROM Vers; Bootloader Version; Bootloader Vers; Power Unit Code Number; PU Code no; Power Unit Code Number Actual; PU Code No. Act

r0197[0...1] Bootloader version / Bootloader vers
Access level: 4 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
-
Max:
-
Factory setting:
-
Description: Displays the bootloader version.
Index 0:
Displays the bootloader version.
Index 1:
Displays the bootloader version 3 (for CU320-2 and CU310-2)
Value 0 means that boot loader 3 is not available.
Dependency: See also: r0018, r0198
Note
Example:
The value 1010100 should be interpreted as V01.01.01.00.
r0198[0...2] BIOS/EEPROM data version / BIOS/EEPROM vers
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
-
Max:
-
Factory setting:
-
Description: Displays the BIOS and EEPROM data version.
r0198[0]: BIOS version
r0198[1]: EEPROM data version EEPROM 0
r0198[2]: EEPROM data version EEPROM 1
Dependency: See also: r0018, r0197
Note
Example:
The value 1010100 should be interpreted as V01.01.01.00.
r0200[0...n] Power unit code number actual / PU code no. act
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: - Scaling: - Dynamic index: PDS, p0120
Unit group: - Unit selection: - Function diagram: -
Min:
-
Max:
-
Factory setting:
-
Description: Displays the unique code number of the power unit.
Note
r0200 = 0: No power unit data found
p0201[0...n] Power unit code number / PU code no
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: C2(2) Scaling: - Dynamic index: PDS, p0120
Unit group: - Unit selection: - Function diagram: -
Min:
0
Max:
65535
Factory setting:
0
Parameters
7.2 Parameter list
SINAMICS G120X converter
500 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC