Siemens SINAMICS G120X - CO;BO: CU Digital Inputs Status; CU DI Status; CO;BO: CU Digital Inputs Status Inverted; CU DI Status Inv

r0722.0...12 CO/BO: CU digital inputs status / CU DI status
Access level: 2 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: 2201, 2221,
2256
Min:
-
Max:
-
Factory setting:
-
Description: Displays the status of the digital inputs.
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X133. 5) High Low -
01 DI 1 (X133. 6) High Low -
02 DI 2 (X133. 7) High Low -
03 DI 3 (X133. 8) High Low -
04 DI 4 (X133. 16) High Low -
05 DI 5 (X133. 17) High Low -
06 DI 6 (X203. 88) High Low -
07 DI 7 (X203. 87) High Low -
11 DI 11 (X132.3, 4) AI 0 High Low -
12 DI 12 (X132. 10, 11) AI 1 High Low -
Dependency: See also: r0723
Note
AI: Analog Input
DI: Digital Input
X203: IO module terminal
r0723.0...12 CO/BO: CU digital inputs status inverted / CU DI status inv
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: 2119, 2120,
2121, 2130, 2131, 2132, 2133
Min:
-
Max:
-
Factory setting:
-
Description: Displays the inverted status of the digital inputs.
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X133. 5) High Low -
01 DI 1 (X133. 6) High Low -
02 DI 2 (X133. 7) High Low -
03 DI 3 (X133. 8) High Low -
04 DI 4 (X133. 16) High Low -
05 DI 5 (X133. 17) High Low -
06 DI 6 (X203. 88) High Low -
07 DI 7 (X203. 87) High Low -
11 DI 11 (X132.3, 4) AI 0 High Low -
12 DI 12 (X132. 10, 11) AI 1 High Low -
Dependency: See also: r0722
Note
AI: Analog Input
DI: Digital Input
X203: IO module terminal
Parameters
7.2 Parameter list
SINAMICS G120X converter
560 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC