The electrical cabinet installation must be realized in accordance with the dimension drawings
supplied. The minimum cabinet sizes for the installation of converters FSH and FSJ are
provided as follows:
● For FSH: 800 mm (width) × 2000 mm (height) × 600 mm (depth)
● For FSJ: 1000 mm (width) × 2000 mm (height) × 600 mm (depth)
Before converter installation, remove the side, back, and top plates from the cabinet frame, and
mount at least two support plates in the cabinet.
&DELQHWIUDPH
6XSSRUWSODWHV
After the converter is installed in the cabinet, install the side, back, and top plates back to the
cabinet frame.
3.4.5 Mounting the optional components
Depending on the particular application, converters may require optional components. For
more information about optional components, refer to Section "Optional components
(Page 32)".
Mounting
3.4 Mounting the converter
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 73
To Next Page
Loading...
