Siemens SINAMICS G120X - Actual Torque Smoothed; Actual Torque; Current Actual Value Field-Generating Smoothed; Id_Act Smooth; Current Actual Value Torque-Generating Smoothed; Iq_Act Smooth; Modulation Depth Smoothed; Mod_Depth Smth

r0028 Modulation depth smoothed / Mod_depth smth
Access level: 4 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2002 Dynamic index: -
Unit group: - Unit selection: - Function diagram: 5730, 6799,
8950
Min:
- [%]
Max:
- [%]
Factory setting:
- [%]
Description: Displays the smoothed actual value of the modulation depth.
Dependency: See also: r0074
Note
Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The modulation depth is available smoothed (r0028) and unsmoothed (r0074).
r0029 Current actual value field-generating smoothed / Id_act smooth
Access level: 4 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2002 Dynamic index: -
Unit group: - Unit selection: - Function diagram: 6799
Min:
- [Arms]
Max:
- [Arms]
Factory setting:
- [Arms]
Description: Displays the smoothed field-generating actual current.
Dependency: See also: r0076
Note
Smoothing time constant = 300 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The field-generating current actual value is available smoothed (r0029) and unsmoothed (r0076).
r0030 Current actual value torque-generating smoothed / Iq_act smooth
Access level: 4 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2002 Dynamic index: -
Unit group: - Unit selection: - Function diagram: 6799
Min:
- [Arms]
Max:
- [Arms]
Factory setting:
- [Arms]
Description: Displays the smoothed torque-generating actual current.
Dependency: See also: r0078
Note
Smoothing time constant = 300 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The torque-generating current actual value is available smoothed (r0030) and unsmoothed (r0078).
r0031 Actual torque smoothed / Actual torque
Access level: 2 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2003 Dynamic index: -
Unit group: 7_1 Unit selection: p0505 Function diagram: 5730, 6799
Min:
- [Nm]
Max:
- [Nm]
Factory setting:
- [Nm]
Description: Displays the smoothed torque actual value.
Dependency: See also: r0080
Parameters
7.2 Parameter list
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 475