Siemens SINAMICS G120X - CI: Free Tec_Ctrl 2 Limit Maximum Signal Source; Ftec2 Lim Max S_S; CI: Free Tec_Ctrl 2 Limit Minimum Signal Source; Ftec2 Lim Min S_S; CI: Free Tec_Ctrl 2 Limit Offset Signal Source; Ftec2 Lim Offs; CO: Free Tec_Ctrl 2 Output Signal; Ftec2 Out_Sig

r11294 CO: Free tec_ctrl 2 output signal / Ftec2 out_sig
Access level: 2 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: PERCENT Dynamic index: -
Unit group: - Unit selection: - Function diagram: 7030
Min:
- [%]
Max:
- [%]
Factory setting:
- [%]
Description: Display and connector output for the output signal of the free technology controller 2.
p11297 CI: Free tec_ctrl 2 limit maximum signal source / Ftec2 lim max s_s
Access level: 3 Calculated: - Data type: Unsigned32 /
FloatingPoint32
Can be changed: T, U Scaling: PERCENT Dynamic index: -
Unit group: - Unit selection: - Function diagram: 7030
Min:
-
Max:
-
Factory setting:
11291[0]
Description: Sets the signal source for the maximum limit of the free technology controller 2.
Dependency: See also: p11291
p11298 CI: Free tec_ctrl 2 limit minimum signal source / Ftec2 lim min s_s
Access level: 3 Calculated: - Data type: Unsigned32 /
FloatingPoint32
Can be changed: T, U Scaling: PERCENT Dynamic index: -
Unit group: - Unit selection: - Function diagram: 7030
Min:
-
Max:
-
Factory setting:
11292[0]
Description: Sets the signal source for the minimum limit of the free technology controller 2.
Dependency: See also: p11292
p11299 CI: Free tec_ctrl 2 limit offset signal source / Ftec2 lim offs
Access level: 3 Calculated: - Data type: Unsigned32 /
FloatingPoint32
Can be changed: T, U Scaling: PERCENT Dynamic index: -
Unit group: - Unit selection: - Function diagram: 7030
Min:
-
Max:
-
Factory setting:
0
Description: Sets the signal source for the limit offset of the free technology controller 2.
r29018[0...1] Application firmware version / APP FW version
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
-
Max:
-
Factory setting:
-
Description: Displays the application firmware version.
Index: [0] = Firmware version
[1] = Build increment number
Parameters
7.2 Parameter list
SINAMICS G120X converter
914 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC