Siemens SINAMICS G120X - CO: Absolute Current Actual Value; I_Act Abs Val; CO: Output Current Maximum; Current Max; CO: Output Frequency; F_Outp; CO: Phase Current Actual Value; I_Phase Act Val

r0066 CO: Output frequency / f_outp
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2000 Dynamic index: -
Unit group: 2_1 Unit selection: p0505 Function diagram: 6730, 6731,
6792, 6799, 6841, 6842, 6843
Min:
- [Hz]
Max:
- [Hz]
Factory setting:
- [Hz]
Description: Display and connector output for the unsmoothed output frequency of the power unit.
Frequency components from the slip compensation (induction motor) are included.
Dependency: See also: r0024
Note
The output frequency is available smoothed (r0024) and unsmoothed (r0066).
r0067 CO: Output current maximum / Current max
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2002 Dynamic index: -
Unit group: 6_2 Unit selection: p0505 Function diagram: 6300, 6640,
6724, 6828, 6850
Min:
- [Arms]
Max:
- [Arms]
Factory setting:
- [Arms]
Description: Display and connector output for the maximum output current of the power unit.
Dependency: The maximum output current is determined by the parameterized current limit and the motor and converter thermal
protection.
See also: p0290, p0640
r0068[0...1] CO: Absolute current actual value / I_act abs val
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2002 Dynamic index: -
Unit group: 6_2 Unit selection: p0505 Function diagram: 6300, 6714,
6799, 7017, 8017, 8021, 8022
Min:
- [Arms]
Max:
- [Arms]
Factory setting:
- [Arms]
Description: Displays actual absolute current.
Index: [0] = Unsmoothed
[1] = Smoothed with p0045
Dependency: See also: r0027
NOTICE
The value is updated with the current controller sampling time.
Note
Absolute current value = sqrt(Iq^2 + Id^2)
The absolute value of the current actual value is available smoothed (r0027 with 300 ms, r0068[1] with p0045) and
unsmoothed (r0068[0]).
r0069[0...8] CO: Phase current actual value / I_phase act val
Access level: 4 Calculated: - Data type: FloatingPoint32
Can be changed: - Scaling: p2002 Dynamic index: -
Unit group: 6_5 Unit selection: p0505 Function diagram: 6730
Min:
- [A]
Max:
- [A]
Factory setting:
- [A]
Parameters
7.2 Parameter list
SINAMICS G120X converter
492 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC