Table 6-35 Instance Attribute
No.
Service Type Name Value/explanation
2 get, set UINT16 Commissioning
state
p0010
3 get INT16 Motor Type p0300
6 get, set REAL Rated Current p0305
7 get, set REAL Rated Voltage p0304
8 get, set REAL Rated Power p0307
9 get, set REAL Rated Frequency p0310
10 get, set REAL Rated Tempera‐
ture
p0605
11 get, set REAL Max Speed p0322
12 get, set UINT16 Pole pair number p0314
13 get, set REAL Torque Constant p0316
14 get, set REAL Inertia p0341
15 get, set REAL Base Speed p0311
19 get, set REAL Cos Phi p0308
TCP/IP Interface Object, Instance Number: F5 hex
Supported services
Class ● Get Attribute all
● Get Attribute single
Instance ● Get Attribute all
● Get Attribute single
● Set Attribute single
Table 6-36 Class Attribute
No. Service Type Name
1 get UINT16 Revision
2 get UINT16 Max Instance
3 get UINT16 Num of Instances
Table 6-37 Instance Attribute
No. Service Type Name Value/explanation
1 get UNIT32 Status Fixed value: 1 hex
1: Configuration acknowledged, by DHCP or saved
values
2 get UNIT32 Configuration Ca‐
pability
Fixed value: 94 hex
4 hex: DHCP supported,
10 hex: Configuration can be adjusted,
80 hex: ACD-capable
Advanced commissioning
6.3 Drive control
SINAMICS G120X converter
236 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
To Next Page
Loading...
