Siemens SINAMICS G120X - Line Harmonics Filter

Article number
Converter frame size Rated power (kW) Line reactor
400 V converters
FSH 315 6SL3000-0CE36-3AA0
355 ... 400 6SL3000-0CE37-7AA0
FSJ 450 6SL3000-0CE38-7AA0
500 ... 560 6SL3000-0CE41-0AA0
690 V converters
FSH 315 ... 400 6SL3000-0CH34-8AA0
450 6SL3000-0CH36-0AA0
FSJ 500
560 ... 630 6SL3000-0CH38-4AA0
2.6.3 Line harmonics filter
Note
Line harmonics filters are available as optional components for 400 V converters of frame sizes
FSB to FSG.
The line harmonics filters reshape the distorted current back to the desired sinusoidal
waveform. With the line harmonics filters, the converter fulfills the IEEE 519 standards.
If you use a line harmonics filter, you do not need a line reactor or a line filter.
When using the line harmonics filter, observe the following restrictions:
● The permissible line voltage is 380 V ... 415 V 3 AC ±10 %.
● The operating frequency is 50 Hz.
For technical details refer to the following link:
Line harmonics filter (https://www.schaffner.com/products/download/product/datasheet/
fn-3440-ecosine-50hz-passive-harmonic-filters/)
Article number
400 V Converter
frame size
Rated power (kW) Line harmonics filter
FSB 5.5 UAC:FN34406112E2XXJRX
7.5 UAC:FN34408112E2XXJRX
FSC 11 UAC:FN344011113E2FAJRX
15 UAC:FN344015113E2FAJRX
Description
2.6 Optional components
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 35