Siemens SINAMICS G120X - BI: 2 Nd Acknowledge Faults; 2 Nd Acknowledge; BI: 3 Rd Acknowledge Faults; 3 Rd Acknowledge; BI: External Fault 1; External Fault 1

p2104[0...n] BI: 2nd acknowledge faults / 2nd acknowledge
G120X_DP,
G120X_PN
Access level: 3 Calculated: - Data type: Unsigned32 / Binary
Can be changed: T, U Scaling: - Dynamic index: CDS, p0170
Unit group: - Unit selection: - Function diagram: 2546, 8060
Min:
-
Max:
-
Factory setting:
[0] 722.5
[1] 722.5
[2] 0
[3] 0
Description: Sets the second signal source to acknowledge faults.
Note
A fault acknowledgment is triggered with a 0/1 signal.
p2104[0...n] BI: 2nd acknowledge faults / 2nd acknowledge
G120X_USS Access level: 3 Calculated: - Data type: Unsigned32 / Binary
Can be changed: T, U Scaling: - Dynamic index: CDS, p0170
Unit group: - Unit selection: - Function diagram: 2546, 8060
Min:
-
Max:
-
Factory setting:
[0] 722.5
[1] 0
[2] 0
[3] 0
Description: Sets the second signal source to acknowledge faults.
Note
A fault acknowledgment is triggered with a 0/1 signal.
p2105[0...n] BI: 3rd acknowledge faults / 3rd acknowledge
Access level: 3 Calculated: - Data type: Unsigned32 / Binary
Can be changed: T, U Scaling: - Dynamic index: CDS, p0170
Unit group: - Unit selection: - Function diagram: 2546, 8060
Min:
-
Max:
-
Factory setting:
0
Description: Sets the third signal source to acknowledge faults.
Note
A fault acknowledgment is triggered with a 0/1 signal.
p2106[0...n] BI: External fault 1 / External fault 1
Access level: 3 Calculated: - Data type: Unsigned32 / Binary
Can be changed: T, U Scaling: - Dynamic index: CDS, p0170
Unit group: - Unit selection: - Function diagram: 2546
Min:
-
Max:
-
Factory setting:
1
Description: Sets the signal source for external fault 1.
Dependency: See also: F07860
Note
An external fault is triggered with a 1/0 signal.
Parameters
7.2 Parameter list
SINAMICS G120X converter
766 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC