Siemens SINAMICS G120X - Parameters for the Speed Limitation; Speed Limitation

6.5.2.5 Speed limitation
The maximum speed limits the speed setpoint range for both directions of rotation.
0D[LPXPVSHHG
0LQ
0D[






[
\
[
\
W
\\[[
S
S
The converter generates a message (fault or alarm) when the maximum speed is exceeded.
If you must limit the speed depending on the direction of rotation, then you can define speed
limits for each direction.
Parameters
Table 6-85 Parameters for the speed limitation
Number Name Factory setting
p1082[D] Maximum speed 1500 rpm
p1083[D] CO: Speed limit in positive direction of rotation 210000 rpm
p1085[C] CI: Speed limit in positive direction of rotation 1083
p1086[D] CO: Speed limit in negative direction of rotation -210000 rpm
p1088[C] CI: Speed limit in negative direction of rotation 1086
Advanced commissioning
6.5 Setpoints and setpoint processing
SINAMICS G120X converter
344 Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC