Parameter Description Factory setting
p1036[C] BI: Motorized potentiometer setpoint lower Dependent on the converter
p1055[C] BI: Jogging bit 0 Dependent on the converter
p1056[C] BI: Jogging bit 1 Dependent on the converter
p1113[C] BI: Setpoint inversion Dependent on the converter
p2103[C] BI: 1. Acknowledge faults Dependent on the converter
p2106[C] BI: External fault 1 1
p2112[C] BI: External alarm 1 1
For further binector inputs and additional information on parameters, please refer to the
parameter list.
Parameter list (Page 470)
Advanced commissioning
6.3 Drive control
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 189
To Next Page
Loading...
