Siemens SINAMICS G120X - Page 293

Parameter
Number Name Factory setting
p1055[C] BI: Jogging bit 0 Depending on the
converter
p1056[C] BI: Jogging bit 1 Depending on the
converter
p1058[D] Jogging 1 speed setpoint 150 rpm
p1059[D] Jogging 2 speed setpoint -150 rpm
p1082[D] Maximum speed 1500 rpm
p1110[C] BI: Inhibit negative direction Depending on the
converter
p1111[C] BI: Inhibit positive direction 0
p1113[C] BI: Setpoint inversion 0
p1120[D] Ramp-function generator ramp-up time Depending on the
converter
p1121[D] Ramp-function generator ramp-down time Depending on the
converter
Advanced commissioning
6.3 Drive control
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC 291