Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-131
FIP 1. 11
016-404 Certificate DB Error
Cause:
Certificate DB access error.
Solution:
The Certificate DB is invalid. Initialize the Certificate DB and security setting and then restart the
printer.
FIP 1. 12
016-405 Certificate DB Error
Cause:
Invalid security setting error.
Solution:
Initialize the Certificate DB and security setting and then restart the printer. Contact the admin-
istrator for security resetting.
Step Check and Action Yes No
1
Check the connection between the CONTROL
PANEL and the ESS PWB.
• Is the UI HARNESS ASSEMBLY connected
securely?
Go to Step 2.
Securely
connect the UI
HARNESS ASSEM-
BLY
2
• Replace the UI HARNESS ASSEMBLY.
• Does an error occur?
Go to Step 3.
Troubleshooting
complete.
3
• Replace the CONTROL PANEL. (REP 1.1
Control Panel (3610) / REP 1.12 Control Panel
(3615))
• Does an error occur?
Replace
(REP 5.1 ESS
PWB)
Troubleshooting
complete.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux