Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-284
FIP 1. 306
116-328 ESS Data Cache Error
Cause:
Communication fail between 1 CPU network and ESS F/W.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 307
116-343 ASIC Fail
Cause:
ASIC-related Fatal Error.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 308
116-350 On Board Network Communication Fail
Cause:
Communication fail between 1 CPU network and ESS F/W.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Perform the following in sequence
• " Network System Fault Check"
• " Network-related Details Check Flow"
3. Update to the latest F/W.
4. If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then replace (REP 5.1 ESS PWB).

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux