Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-252
FIP 1. 261
050-135 IOT Zone T2 + T3 + T4 + TR2 + TR3 Jam
050-135 is displayed in the UI. 073-101 is registered in the Error Log.
Cause:
When Dynamic Jam (cause) was detected:
• 073-101 IOT Path3 SNS On Jam
When Static Jam (collateral) was detected:
• Tray2 Path Sensor On, Tray3 Path Sensor On, and Tray4 Path Sensor On
S
olution:
1. Paper jam has occurred. Remove the jammed paper.
2. If there is no jammed paper, or the error still occurs after having removed the jammed paper,
turn the power Off and On to check that the error recurs, then proceed to
FIP 1. 277.
FIP 1. 262
050-136 IOT Zone T3 + T4 + TR3 Jam
050-136 is displayed in the UI. 072-101 is registered in the Error Log.
Cause:
When Dynamic Jam (cause) was detected:
• 072-101 IOT Path2 SNS On Jam
When Static Jam (collateral) was detected:
• Tray3 Path Sensor On
S
olution:
1. Paper jam has occurred. Remove the jammed paper.
2. If there is no jammed paper, or the error still occurs after having removed the jammed paper,
turn the power Off and On to check that the error recurs, then proceed to
FIP 1. 277.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux