Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-207
FIP 1. 176
033-515 JBIG NF Error
Cause:
In JPEG receive, cannot get color/monochrome multi-level data.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 177
033-517 DFAX Password Error
Cause:
Mismatch between DFAX Password and Fax/Scan Lock Password.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. The password is incorrect. Enter the correct password. If you have forgotten your password,
contact the system administrator.
2. Take corrective actions at the host side.
To Next Page
Loading...
