Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-247
FIP 1. 255
042-330 Rear Fan Failure
Cause:
MCU detects an error upon receiving error signal from the Rear Fan.
Solution:
Turn the power Off and On to check that the error recurs, then proceed to the FIP.
Step Check and Action Yes No
1
• Execute the Diag Digital Output [042-001]
to check the rotation of the Rear Fan.
• Is it working properly?
Replace
(REP 5.6 MCU
PWB)
Go to Step 2.
2
• Check the installation of the Rear Fan.
• Manually rotate the Rear Fan. Is there any
resistance?
Reinstall the
Rear Fan
properly
Go to Step 3.
3
• Check the connection between the Rear Fan
and the LVPS, as well as between the LVPS
PWB and the MCU PWB.
• Are the REAR FAN HARNESS ASSEMBLY and
the LVPS HARNESS ASSEMBLY connected
securely?
Go to Step 4.
Securely connect
the REAR FAN HAR-
NESS ASSEMBLY
and the LVPS HAR-
NESS ASSEMBLY
4
• Replace the Rear Fan. PL
Does an error occur? Go to Step 5.
Troubleshooting
complete.
5
• Replace the REAR FAN HARNESS
ASSEMBLY.
• Does an error occur?
Go to Step 6.
Troubleshooting
complete.
6
• Replace the LVPS HARNESS ASSEMBLY.
• Does an error occur?
Go to Step 7.
Troubleshooting
complete.
7
•Replace (REP 5.3 LVPS).
• Does an error occur?
Replace
(REP 5.6 MCU
PWB)
Troubleshooting
complete.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux