Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-288
FIP 1. 317
116-369 PCI Error Messages received from Bus #0 - Device #0
Cause:
Remove EX PCI x4 port Error. (Device ID 0x64 (x4))
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 318
116-390 ESS NVRAM1 SIZE And ID Check Fail
Cause:
Detected by consistency check between NVRAM size requested by the system and actual size
and consistency check of ID recorded at the first power-on.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace (REP 5.1 ESS PWB).
FIP 1. 319
116-396 Fatal Error Related to Maillib Other Errors (of File 2 Net Library)
Cause:
S/W bug.
Solution:
1. Turn the power Off and On to check that the error recurs.
2. Perform the following in sequence
• " Network System Fault Check"
• " Network-related Details Check Flow"
3. Update to the latest F/W.
4. If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then replace (REP 5.1 ESS PWB).

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux