Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-14
Engine Diagnostic Testing
Sensor Test (Digital Output)
Checks whether the DI (digital input) components such as sensors and switches on the IOT are func-
tioning properly.
Displays “0” when Sensor Test is started. This value is increased when the DI components are switched
from OFF to ON, which is used for confirming that the component functions normally. Sensor Test tar-
gets all DI components.
Sensor Test Parameter Table
Chain Link Component
010 200 Fusing Relay Enable
010 201 Fusing Fuse Open (invalid code)
041 300 Inter Lock Front Cover
041 301 Inter Lock Rear Cover
042 200 Rear Fan Alarm
042 201 LVPS Fan Alarm
071 100 MSI No Paper Sensor
071 101 Tray 1 No Paper Sensor [CST No Paper Sensor]
071 102 Regi Sensor
071 103 Exit Sensor
071 116 Option Feeder 1 No Paper Sensor [Tray 2 No Paper Sensor]
071 117 Option Feeder 2 No Paper Sensor [Tray 3 No Paper Sensor]
071 118 Option Feeder 3 No Paper Sensor [Tray 4 No Paper Sensor]
071 119 Option Feeder 1 Path Sensor [Tray 2 Path Sensor]
071 120 Option Feeder 2 Path Sensor [Tray 3 Path Sensor]
071 121 Option Feeder 3 Path Sensor [Tray 4 Path Sensor]
071 122 Full Stack Sensor
071 200 Option Feeder 1 Motor Alarm [(Tray 2)MOTOR ASSY OPTION]
071 201 Option Feeder 2 Motor Alarm [(Tray 3)MOTOR ASSY OPTION]
071 202 Option Feeder 3 Motor Alarm [(Tray 4)MOTOR ASSY OPTION]

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux