Xerox WorkCentre 3615

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-208
FIP 1. 178
033-518 DFAX Fax Country is not set correctly
Cause:
When DFAX job is executed, Fax Country code is Unknown.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Set the Country code correctly.
2. Take corrective actions at the host side.
FIP 1. 179
033-519 DFAX Fax Function is not available
Cause:
When DFAX job is executed, Fax function is not Enabled.
*When this error occurs at the same time as 033-518, 033-519 is displayed preferentially.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Set the Fax function Enable.
2. Take corrective actions at the host side.