Maintenance
Phaser 3610, WorkCentre 3615 Service Manual 6-3
Cleaning
General Precautions
CAUTIONS: When cleaning your printer do not use organic or strong chemical solvents or aerosol
cleaners. Do not pour fluids directly into any area. Use supplies and cleaning materials only as
directed in this documentation.
WARNING:
• Keep all cleaning materials out of the reach of children.
• Do not use pressurized spray cleaning aids on or in the printer. Some pressurized sprays
contain explosive mixtures and are not suitable for use in electrical applications. Use of such
cleaners increase the risk of fire and explosion.
• Do not remove the covers or guards that are fastened with screws. You cannot maintain or
service any parts that are behind these covers and guards. Do not attempt any maintenance
procedure that is not described in the documentation supplied with your printer.
• Internal parts of the printer can be hot. Use caution when doors and covers are open.
• Do not place anything on top of the printer.
• Do not leave the covers and doors open for any length of time, especially in well-lit places.
Light exposure can damage the imaging units.
• Do not open covers and doors during printing.
• Do not tilt the printer while it is in use.
• Do not touch the electrical contacts or gears. Doing so could damage the printer and cause
the print quality to deteriorate.
• Ensure any parts removed during cleaning are replaced before you plug in the printer.
CAUTION: Never apply alcohol or other chemicals to any part of the printer. Never use a damp
cloth to clean up toner. If you remove the Drum Cartridge, protect it from exposure to light as light
exposure can quickly degrade Drum Cartridge performance and result in early failure.
To Next Page
Loading...
Need help?
General
