Xerox WorkCentre 3615 Service Manual

Overview
Phaser 3610, WorkCentre 3615 Service Manual 1-11
Introduction
The Phaser 3610, WorkCentre 3615 laser printers have a single-pass laser-design architecture based on
the electrophotographic recording principle, which offers mono print speed at 30/30 ppm, and
resolutions up to 1200 x 1200 dots-per-inch (dpi). The printers supports Adobe PostScript 3 and PCL6,
USB 2.0, and 10/100 Base-TX Ethernet. The Phaser 3610, WorkCentre 3615 printers provides a
standard 150-Sheet Bypass Tray and a standard 250-Sheet Tray 1. The Bypass Tray supports specialty
media, card stock, and envelopes. The standard paper input is 400 sheets and the maximum input with
optional Trays 2, 3, and 4 is 2,050 sheets. The Output Tray holds 300 sheets facedown.
The printer options add memory, paper capacity, and functionality. Memory upgrades are available to
increase the standard RAM from 1 GB up to 2 GB maximum. A 40 GB Hard Disk Drive and a 550-Sheet
Feeder are available as an option. Auto-duplexing is available and no tools are required to install the
Duplex Unit.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux