Xerox WorkCentre 3615 Service Manual

Specifications
Phaser 3610, WorkCentre 3615 Service Manual 8-5
Electrical Properties
Power Voltage and Frequency
Power Consumption
The following table represents the power consumption of each operation mode under rated input
voltage (110, 127, 220VAC).
Surge Current
When the power switch is turned on, the surge current shall be maximum 50Amp (Cold start)/135Amp
(Hot start) at first 2.5msec, and 80Amp(120V/220V/240V) / 85Amp(100V) within 10msec.
M/C Voltage (V) Frequency (HZ) Input Power (A) Phase
110V M/C
110 to 127V +/-10%
(99 to 140V)
50/60 +/-3HZ
11A or less
(110V system)
Single-phase two-
wire system
220V M/C
220 to 240V +/-10%
(198 to 264V)
50/60 +/-3HZ
6A or less
(220V system)
Single-phase two-
wire system
Operation Mode Power Consumption
Deep Sleep
4.5 Wh/h (Ave) or less (3610)
5.5 Wh/h (Ave) or less (3615)
Sleep
13.5 Wh/h (Ave) or less (3610)
19.5 Wh/h (Ave) or less (3615)
Standby
76 Wh/h (Ave) or less (3610)
82 Wh/h (Ave) or less (3615)
During continuous printing
705 Wh/h (Ave) or less (3610)
750 Wh/h (Ave) or less (3615)
Maximum rated value
1350 W (Max) or less (3610)
1390 W (Max) or less (3615)

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux