Xerox WorkCentre 3615 Service Manual

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-135
FIP 1. 20
016-507 SMTP Authentication Fail for Maillib
Cause:
Cannot login to SMTP server to send email.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. On CWIS, check if user name and password used for SMTP server are set correctly.
2. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace (REP 5.1 ESS PWB).
FIP 1. 21
016-520 Ipsec Certificate Error
Cause:
Self device certificate error.
Solution:
1. Certificate of self device is invalid. Contact administrator.
• Reset the certificate from other connectable client with EWS.
2. If no device can be connected, disconnect cable, turn off IPsec, and then reset certificate with
EWS.
FIP 1. 22
016-521 Ipsec Certificate Error
Cause:
Remote device certification verification error.
Solution:
1. Contact administrator. Certificate of destination client is invalid.
2. Confirm certificate of destination client and reset.

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux