Xerox WorkCentre 3615 Service Manual

Specifications
Phaser 3610, WorkCentre 3615 Service Manual8-2
Configuration of Printer
System Configuration for the 3610
IOT (Image Output Terminal):
• The IOT writes video data from each portion on paper for copying, outputting files received
by the facsimile, and outputting from the printer. The Laser xerography technology engine
allows for image recording on paper up to 14 in. (355.6mm) length at 600 dots/25.4mm.
Operator Panel:
• The operator panel displays various settings, instructions, and error messages for printing. It
has buttons for user operation.
SFP Controller:
• The SFP controller converts print data (control code data, character code data, graphics data,
image data, etc.) sent from the host computers to video data, and transfer them to IOT.
Configuration Table
Y: feature available, N: feature not available
Product Name
Opera-
tor Panel
Duplex Network
Wire-
less
USB
Font-
ROM
SD-Card Memory
Phaser3610N
2 Line
Bitmap
N Y Optional 1 N
Optional
1 slot
Optional
512MB
Phaser3610DN
2 Line
Bitmap
Y Y Optional 1 N
Optional
1 slot
Optional
512MB
Phaser3610NM
2 Line
Bitmap
Y Y Optional 1 N
Optional
1 slot
Optional
512MB
Phaser3610DNM
2 Line
Bitmap
Y Y Optional 1 N
Optional
1 slot
Optional
512MB

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux